Magnetic Insect Screen
Magnetic Insect Screen
Couldn't load pickup availability
SUMMER OFFER
🔥 -10% from 2 screens
🔥 -20% from 4 screens
Discount applied automatically in your cart!
Magnetic closure on all 4 sides
Continuous magnetic strips on all four sides. The mesh stays taut, with no central opening.
Installed in minutes
No drilling, no tools. Stick the adhesive tape to the frame, fit the screen and remove it whenever you like.
Premium fibreglass mesh
Breathable, hard-wearing fabric. Lets light and air through, but not insects.
Ideal for any room
Bathrooms, kitchens and bedrooms. Stands up to wind and lasts season after season.
2 cm tape
Firm, long-lasting hold
30-day guarantee
Try it risk-free, satisfied or refunded for 30 days.
-
I can finally leave the door open
Fitted it to the 90 cm door in twenty minutes, no drilling. The magnets close on their own and the dog goes in and out without any trouble.
-
The mesh is very sturdy
Two for the living room windows, 60x60. Thicker than I expected and it doesn't block the light. I'll order more for the bedroom.
-
Does the job, but measure carefully
Good value for money. Measure the frame twice, the sizes are tight. Air gets through, insects don't.
Free shipping
Included with this purchase
24/7 support
A team at your service
How do I measure correctly?
How do I measure correctly?
It depends where you measure. Choose method A or B.
A — You measure the window or door opening
Add 4 cm to the width and 4 cm to the height. The magnetic strips take up 2 cm on each side.
B — You measure the frame you'll stick it to (outside or inside)
Add nothing. Measure the whole frame, edge to edge.
What if it's a little too big?
Not a problem. You can fold the excess over or shift the screen slightly, without it getting in the way when opening or closing.
Tip: Always round up. Better slightly too big than too tight 😉
How do I install it?
How do I install it?
Installation in 5 steps
1. Clean the frame with an alcohol wipe and let it dry for 1 minute.
2. Unroll the magnetic tape, measure it and cut it into 4 lengths: 2 for the height and 2 for the width.
3. Peel the backing off each length and stick them all around the frame, on all 4 sides.
4. Press each strip down firmly so it grips well. Add extra tape if you need a stronger hold.
5. Place the screen against the magnetic strips and line it up. Check the position, adjust if needed and enjoy a summer without insects.
🔹 Note: the magnets are hidden and built into the whole edge of the screen, for a perfect hold on all 4 sides.
